kWh by Breaker
Latest cumulative meter reading
| Breaker / Load | Meter | kWh |
|---|
Energy Dashboard
Live values follow your register polling settings. Usage charts use saved cumulative energy readings.
Latest meter reading: —
Last historian reading: —
Last historian reading: —
Current Month Summary
Total Monitored kWh
—
Usage appears after sufficient readings are recorded
Breaker Channels
—
Configured channels reporting
Estimated Energy Cost
—
$/ kWh
Monthly billing. Shorter months use their last day.
Energy Usage Trend (All Monitored Breakers)
Breaker Usage Comparison This Month vs Last Month
Current Month Breaker Share
Continuous Electrical Health
Live meter readings, historical trends, and Voltage THD event history.
Last live measurement: —
Continuous Trend
Saved values follow each register's history settings
Electrical Health Summary
No data yet. Electrical health summaries will appear as your meters report readings.
Harmonic Snapshot
Harmonic Spectrum (Current)
Power Factor Health
Total PF
—
—
24-Hour PF Trend
Power factor data unavailable.
Power Quality Snapshot
Voltage THD Event Timeline
Watch 3–5% · Alarm above 5%| Started | Meter | Severity | Duration | Worst Phase | Maximum THD |
|---|
Continuous Power Monitoring
Live power metrics and recorded demand trends from configured meters.
Last power reading: —
Select a meter
Select a monitored service
Real Power—
Reactive Power—
Apparent Power—
Total Power Factor—
Displacement PF—
15-Min Demand—
Peak Demand—Meter recorded peak
Voltage (Avg L-N)—
Current (Avg)—
Frequency—
Continuous Trend
Power and demand history follows each register's settings
Power Health Summary
Load the Power tab to summarize measured power and demand data.
Power Snapshot
Avg kW—
Max kW—
Avg kVA—
Avg kVAR—
Average kW by hour
Demand Health
Current Demand
—kW
Demand Trend
Demand data unavailable.
Weather & Load Snapshot
Loading outdoor weather…
Current Outdoor Temp——
Peak Temperature——
Temp-Load Correlation—Awaiting aligned data
Peak Demand Time——
Demand Range—Selected period
Power Health—Based on measured power factor
Power Event Timeline
Peak, demand, reactive, and general events| Started | Meter | Event | Duration | kW | kVAR | Notes |
|---|---|---|---|---|---|---|
| No power-event rules are configured. Voltage THD events remain available on the Power Quality tab. | ||||||
Energy Reports
Review energy usage and estimated costs for your configured billing cycle.
Each breaker = ending cumulative kWh − beginning cumulative kWh. Breakers are summed into each meter subtotal.
Facility Total
—
—
Estimated Cost
—
Using current blended rate
Meter & Breaker Usage & Cost
Cost uses the blended energy rate configured on the dashboard.| Meter / Breaker | Beginning Reading | Ending Reading | Usage (kWh) | Estimated Cost |
|---|---|---|---|---|
| Facility Total | — | — | ||
Loading saved cycle…
Only periods with recorded data are shown. Change your monthly start day on the dashboard. Partial and current periods are labeled.
Meter Usage by Billing Cycle
Facility Total by Billing Cycle
Billing Cycle Usage & Cost
Your saved billing cycleTotal Usage
—
—
Estimated Cost
—
Using current blended rate
Average per Day
—
kWh/day
Highest Period
—
—
Breaker Usage & Cost
Usage is ending cumulative kWh minus beginning cumulative kWh.| Date / Period | Beginning Reading | Ending Reading | Usage (kWh) | Estimated Cost |
|---|---|---|---|---|
| Total | — | — | ||
Summarizes saved meter statistics, THD/harmonics, and recorded power-quality events for the selected period.
AI Power Performance Summary
Choose dates and generate the report.
Electrical Performance Statistics
Measured minimum, average, and maximum values| Meter | Metric | Minimum | Average | Maximum | Samples |
|---|
Voltage THD Events
Watch and Alarm history in report period| Started | Meter | Severity | Duration | Worst Phase | Maximum THD |
|---|
Setup
Configure the local site, meters and breakers, email reports, and local users.
Site
Saving keeps all historian readings and reloads the local configuration.
System
Local application, historian, meter communications, backups, and software updates.
Installed version: 1.0.17
Silver historian
—Database Health / PostgreSQL diagnostics
Database host / name—
Database size—
Historian records—
Historian range—
Last database write—
Write activity—
Pending records—
Oldest pending item—
Available disk (application computer)—
Total MeterSight Silver data—
Connection status—
Backup health—
Loading database health…
Historian records include energy readings, electrical intervals and THD samples. Live snapshots are excluded. Pending records include buffered writes waiting for the historian.
Protected customer data
—Database backups
Loading backup status…
Application delivery
—Software updates
Loading update status…
After downloading, run the installer and approve Windows administrator access. The installer backs up your data before updating.